While many people have reported issues with their AirPods not being able to charge even when the charger does have some power supply left, your situation is unique. Your AirPods continue to charge without issue, but your case isn’t getting charged, and it can’t even pass that power supply juice to your headsets after that. While a defective case isn’t as common as one AirPods malfunctioning, it does happen from time to time.
It’s easy to spot because when you plug it in, you see the beam, and your AirPods may even start charging if you turn them back in the case, but when you disconnect it, they halt charging and the case stays at 0%. This bug is primarily a software problem, which is advantageous because it is easily resolved in a few stages. In some instances, it may be a malfunctioning case too though, in which case you should try these easy solutions to see whether your connector works once more.
Before You Begin
Before you can find solutions to a problem, you must first understand what the problem is and what is causing it. You must double-check that it’s the AirPods that aren’t charging but not the other way about. Some people have had issues with their AirPods, attempting to break them and then being perplexed as to why their case isn’t functioning. So, here’s a quick way to see if your case is charging or not:
- Remove the lid of your Case with the AirPods within.
- Keep the case close to your iPhone.
- Pause a few seconds for the battery condition to appear, as shown below.
- Attach the charging cable to the case and check to see if it is charging.
Why isn’t my AirPods case charging?
There could be a number of reasons why your AirPod or AirPod Pro case isn’t charging, but the most common is a glitch with the case itself. The majority of users reported the same concern, but if that isn’t the case, you might be concerned about the following:
1. Flawed Charger
This is most common with people who use third-party chargers. Because Apple no longer includes a charging cable with their iPhones, most individuals are opting for a low-cost third-party option. However, if you are unsure and purchase a subpar charger, you may end up shorting out your devices. So, if your AirPods aren’t charging, look for a separate charger.
2. Dirt on the plug
The second issue could be that you have dirt or soot on the connector, which is interfering with the charging mode.
3. Conflicting cable
Similar to how people buy inexpensive third-party options for chargers, the same is true for cables. Apple isn’t known for making the most sturdy cables, so if you split one and replace it with a non-compatible third-party alternative, you’ll have sluggish charging rates as well as other issues.
4. Case not functioning
Finally, the last reason to be concerned about is that you may have cracked your case and thus it is not getting charged. This is the worst-case situation, and you must be prepared to replace it if this is the case.
How to Fix an Airpod Case to Charge
If you’ve tried charging your AirPods but nothing seems to operate, there could be a problem with the case. Try these steps given to see if you could indeed locate and resolve the issue.
- Examine your connections: If you assume your AirPods case is now not charging, the most obvious suspect is something interfering with the charging link, which could be because the charging cord isn’t fully implanted if you’re charging hooked up, the cord is damaged, or the case isn’t creating productive interaction with the wireless charging foundation if you’re trying to charge wirelessly. Remove the cable and reinsert it and see if your charging beam illuminates. If that doesn’t work, try a different cable. Alternatively, if you’re charging remotely, try a wired charging linkage.
- Charge the case for your AirPods: If your AirPods case can charge, ensure that it is fully charged. The charging beam would then turn green when it is fully charged.
- Check the status of your iPhone’s charging: Whilst your AirPods case is charging, lift the lid and place it next to your phone. The condition of your AirPods must appear on your iPhone after a moment or two. Check for a lightning bolt beside the charge percent for the AirPods case, which indicates that the case is trying to charge. This is also a good place to check to see if your AirPods are trying to charge. The portion of accessible battery life must be showcased on your phone’s screen, beside the battery case details. If you see a lightning bolt, the AirPods are going to charge. Otherwise, they either are charged up (in which particular instance they must say 100%) or just not charging at all.
- Clear out your AirPods case: Disinfect the case of your AirPods, along with the charging port where the battery charger links to the case. A mucky charging case, like dirty AirPods, can cause charging to perform poorly. Make sure to wipe down the boreholes where the AirPods fit, as well as the charger cord at the lower part of the case. If you’re not relaxed doing so, you could indeed take those to an Apple store for assistance with the cleaning.
- Reset the AirPods: If all else fails, try to reset your AirPods. If a firmware bug is preventing the AirPods or case from going to charge, a straightforward reset may be all that is required.
- You Should Update Your AirPods: Is it a while since you upgraded your AirPods? Installing the most recent software update may have a beneficial effect and resolve the issue. It’s always a good idea to make sure you have the most recent software updates. Take a moment to refresh your AirPods and then check to see if the charging conditions have improved.
- Attempt a Different Charger: If you could pick a new charger that is accepted for charging AirPods, that may help as well. Although this does not involve repairing your AirPods charging case, it might very well resolve your issue. There are numerous certified charging options available, including charging pads as well as other remedies. It’s possible that your charging case is cracked and the lightning connector is compromised.
- Please Return Your AirPods: Your AirPods may be covered by a warranty from the store where you bought them. This implies you could simply take them back to the store and get a substitute. This way, you won’t have to deal with any problems and could get back to loving your AirPods. This will be the most workable option for many folks.
If you cannot seem to work on these, you can refer to the following links for assistance at home.
Read more: Methods To Use The App Library on iPhone
Tips for Avoiding Airpod Case Charging Problems
Now that you’ve seen the remedies to your AirPods USB power problems, you could be curious how to avoid having this mess in the first place. If you intend to continue using your AirPods, you must ensure that they are properly cared for. A few prevalent context actions may prevent you from getting certain problems in the future.
- First, make an effort to keep your AirPods charging case someplace secure. Many folks make the error of abandoning the AirPods charging case in an unsafe location. You wouldn’t want beverages to splash on it or food debris to get into your charging case. Keeping your charging case out of serious trouble is in your best interests, but it’s still a good idea to clean it on a regular basis to make sure that it always has a great connection when trying to charge your Airpods.
- It’s also a good idea to consider your lightning cable. You probably don’t want to keep purchasing lightning cables because they get damaged. If you have pets who chew on your lightning cords, this will be a problem. When not being used, the lightning cables should be stored in a locker or another location where they won’t be walked on or damaged beyond repair. This will keep them in good condition and prolong the life of the lightning connector, allowing it to function efficiently with your Airpods charging case.
Is there a reset button on the AirPod case?
If you find issues with the Airpod case, seeing that the case isn’t charging but the AirPods are, the best way to fix the issue is by resetting the AirPod case.
The process might seem very complicated, to begin with. However, with the right steps, you should be able to navigate through the problems in no time at all. To reset the case, here’s what you need to do:
- Start by ensuring that both of the Airpods are placed inside the charging case. Once done, open the cover.
- Find the configuration button and long press on it. You should find it in the back of the case. You can press and hold it for around 15 seconds.
- You have to press it until you see the blinking orange light. This indicates that the reset process has been done successfully.
Now, you need to understand that resetting the Airpods case is an effective way to ensure that your device functions as normally as it should. Resetting is also like a soft reboot, which means that it resets all the software glitches that could have been contributing to the charging issues.
Few Final Words
We hope that the guidance above was beneficial to you and that we have responded to all of your questions about how to care for your AirPods case and how to repair them.